Posts

Kia Clutch Failure-After examining the car needed a Duel-Mass Flywheel

Kia Clutch Failure

Kia Clutch Failure ;These days a clutch is not that simple

During any normal working week. We may get price inquiries for customers. Especially, with a Clutch Repair Estimates for their car. Some of our customers are just wanting a price from us so that they know

Kia Clutch Failure

Kia Clutch Failure;Duel mass flywheel

what to budget for.Hence, and other people are shopping around for the best price.

As a business we find it difficult to pitch the correct price. Because a Kia Clutch Failure is much different to say pricing up a tyre. The prices can vary a great deal. Between say the different qualities that garages use. We know that we could get reconditioned clutches for most car models.

But we prefer to use the best quality clutches available. Because many of the original equipment clutches are made LUK clutches . Therefore, we prefer to use them, As it happens, if we cannot get LUK then we go for original equipment clutches. We find that in the long run. We never get any come backs with the better products. Therefore, we certainly do not want to be having to do a clutch job twice.Because of a faulty product. Lifes to hard as it is.

Kia Clutch Failure

new Kia clutch installed by Andrew

Also we are finding that a lot of modern cars are now fitted with duel-mass flywheels, these were invented by LUK in coordination with BMW in Germany, because the diesel cars were very jumpy when changing gear and BMW wanted a smoother gear change.

Kia Clutch Failure

So this system of different springs on a separate flywheel that fitted between the original flywheel and the clutch plate was invented. Many of the other leading car makers have now taken this option up, but it means much higher repair bills for consumers when their Kia Clutch Failure happens, because usually the duel-mass flywheel goes as well, but we dont know until we have stripped the car down to the clutch. A case in point is a job that we have just done on a Kia. The total job timed at seven hours came to well over a thousand pounds, where an older conventional clutch would have been about £280.

This is the reason why it is difficult to give an exact figure when pricing up a clutch for a customer.

Please click on to the link bellow for more clutch information

http://www.lukclutch.com/content.schaeffler_as.us/us/services_luk_as/technicalinfo/installationtips/clutch_installation_tips.jsp

Eric Roberts

Dual Mass Flywheels- a pain in the neck ? Riginally to smooth out diesel engined cars heavy clutches

Dual Mass Flywheels

watch out if your clutch is slipping you may have a dual mass flywheels gone as well?

Dual Mass Flywheels-As with most tyre and auto centres these days we multi-task and carry out all types of repair work, we are blessed to have mechanics that are capable of doing the other more

Dual Mass Flywheels

Dual Mass Flywheels-A recent DMF that we have fitted

difficult kinds of jobs.

One of the main problems we are finding at the moment is the number of cars that are having clutch problems.This is no real problem to us and we take it in our stride, but the most frightening thing that is becoming prevalent is the increasing number of cars that are requiring Dual Mass Flywheels.

What are dual mass flywheels

In the old days we had a simple clutch plate mechanism that would cost perhaps £200 to £300 to repair, from a small to a large car, now thanks to modern technology we have clutch and flywheels that are part of the same unit. The problem is that you can diagnose a faulty clutch but not a DMF Problems (dual mass flywheel). This seems to affect all makes of vehicles we have fitted them on VWs and Toyota’s this week alone, also on Mercedes.

The idea came out to accommodate the modern demands of the lightweight diesel engines, modern motorists demand their diesel engine runs just as smooth as a petrol engine, also giving better fuel consumption. The DMF acts like a damper between the engine and the gearbox to give a smoother ride when changing gears on a manual transmission system.

Basically, there are two types of DMF. One is made up of a primary and secondary flywheel containing springs and cushions. There is a ring between the outer and the inner flywheel that allows them to slip, this is to stop any damage to the transmission when any torque loads exceed the pressure of the vehicles rating of the transmission.

Dual Mass Flywheels

Of course, the ring is the weak spot and can wear out when too much continual engine loads are applied. We find that this could be the reason that problems seem to occur mostly in people carriers.

Of course, the second type has planetary gearing. Specially made for vehicles with low-revving engines. Hence, that give out stronger vibrations when doing low revs. This type should give much smoother gear changes on diesel engines, similar to the same performance as a petrol engine, also giving a better fuel consumption.

I hope that this is informative and that you don’t need one replacing, but if you do look forward to a big garage bill DMF Failure.

 About Eric Roberts

Hi, I would like to introduce myself. I have worked in the Garage and tyre industry now for 40 years.