Peugeot With Brake Shoe Problems
Table of Contents
Peugeot With Brake Shoe Problems
Peugeot With Brake Shoe Problems
A Common but Preventable Problem: Peugeot 108 with Worn Brake Shoes
A customer complained about his Peugeot 108’s poor braking performance and brought it to Pellon Tyre and Autocentre not long ago. They had observed a mushy feel on the brake pedal and a grinding sound coming from the back. The issue was immediately apparent as we put the car on the ramp: poorly worn rear brake shoes.
Not only did these shoes have some little wear and tear, but they were nearly completely worn out, which reduced their braking effectiveness. If this had been ignored any longer, the brake drums themselves might have been harmed, resulting in a much higher repair expense. Thankfully, we discovered it in time, and the car was able to stop as it should again after a new set of brake shoes was installed, the handbrake was adjusted, and the system was bled.
However, why do brake shoes deteriorate in this way? And what is the Peugeot 108’s backstory?
A Brief Overview of the Peugeot 108’s Past: Peugeot With Brake Shoe Problems
One of those compact city automobiles that is ideal for the narrow streets of Halifax and beyond is the Peugeot 108. It was created as part of a joint venture with Toyota and Citroën, which means that its siblings are the Toyota Aygo and Citroën C1. It was introduced in 2014, replacing the Peugeot 107. With its excellent fuel efficiency, low running costs, and a small size that makes parking easy, the 108 was created with urban drivers in mind.
The model was equipped with a 1.0-litre or 1.2-litre petrol engine, both of which are renowned for their dependability and effectiveness. With a clever touchscreen entertainment system and connection that made it feel more contemporary than some of its competitors, it was popular among younger drivers and city commuters. As SUVs and electric vehicles began to dominate the market, Peugeot ceased manufacture of the 108 in 2021, although many of them are still seen cruising Yorkshire roads.
The Reason Behind the Wear and Tear of Rear Brake Shoes: Peugeot With Brake Shoe Problems
Like many tiny cars, the Peugeot 108 has drum brakes on the back instead of discs. Although drum brakes are less expensive to manufacture and maintain, they are more likely to wear down more quickly in some situations because they don’t disperse heat as well as disc brakes.
The following are some typical reasons why brake shoes wear out:
1. Standard Wear and Tear
Particularly in vehicles that experience frequent stop-starting—often on Halifax’s mountainous roads and town centre traffic—brake shoes inevitably deteriorate over time. Generally speaking, they last 30,000 to 50,000 miles, though this varies based on driving conditions and style.
2. Overuse of Handbrakes
The handbrake and drum brakes operate together; thus, driving with the handbrake partially engaged or using them excessively can wear them out more quickly. This is frequently observed in automobiles driven by inexperienced drivers who may not be as careful to make sure the handbrake is fully removed before driving.
3. Contamination and Brake Dust
Drums have a tendency to trap dust and debris inside of them, in contrast to disc brakes. This accumulation may eventually lead to uneven wear or glaze over of the brake shoes, which would impair braking efficiency. Although frequent maintenance helps avoid this, many drivers ignore their back brakes until they begin to fail.
4. An Unbalanced Braking Mechanism
The brake bias changes, causing the rear brakes to not engage correctly, whether the front brakes are exceptionally strong or the rear brakes are weak because of inadequate adjustment. One side may wear more quickly than the other due to uneven wear.
Although they are not as exposed as disc brakes, drum brakes can nevertheless corrode, particularly in our rainy Yorkshire climate. Long-term standing can cause rust to build on the drums and shoes of an automobile, which can cause uneven wear down when the vehicle is driven again.
The Value of Frequent Brake Inspections-Peugeot With Brake Shoe Problems
Fortunately, this Peugeot 108’s owner was alert enough to the warning indications, which included a soft brake pedal, decreased stopping power, and grinding noises. Ignoring these symptoms might have resulted in a disastrous and expensive brake failure.
As part of routine maintenance, we at Pellon Tyre and Autocentre always advise regular brake inspections. Having them checked can ultimately save money and stress, but it’s one of those things that drivers don’t think about until they start to fail.
Bring your car in for a checkup if you notice any of the following symptoms of brake wear: noisy brakes, a long stopping distance, or a handbrake that doesn’t feel quite right. Maintaining your brakes will guarantee a safe, smooth drive whether you drive a Peugeot 108, Toyota Aygo, or any other vehicle, especially on the steep hills and twisting roads surrounding Halifax!
Concluding Remarks-Peugeot With Brake Shoe Problems
Despite being a small city car, the Peugeot 108 needs regular maintenance to remain roadworthy, just like any other car. Once again, a simple brake inspection can make a significant difference. This customer’s worn-out brake shoes could have been disastrous if ignored.
Another brake shoe problem on this Ford Fiesta.
Therefore, pay attention to your automobile the next time it starts making an odd noise or stops as smoothly as it used to—it could mean the difference between a smooth stop and an expensive repair bill! 🚗💨
- Brake Warning Light on the Dashboard
- Car Juddering When Braking
- Why are my brakes grinding
- Peugeot Van Suspension Problem
- Ford Ranger Thunder Tyres