MOT Testing Number Plates- Information-Pellon Tyres-Halifax-Yorkshire-UK

MOT Testing Number Plates

MOT Testing Number Plates;This blog is part of a series written by Eric Roberts of Pellon Autocentre Halifax UK to advise motorists about the number plate regulations that affect your MOT Test.

This advice comes as part of the Road Vehicle Regulations, (Display of Registration Marks)2001.MOT regulations. Consquently, the new regulations  https://www.gov.uk/browse/driving/number-plate (2001) state that the car must first of all , “have number plates fitted”, this must be that the background colour and words and lettering comply with the regulations. The words and letters should easily readable and in good condition.
The letters and numbers must be correctly spaced. The character font should be of the correct type .The number plate should match the one in your log book, and should comply with British Standard AU 145d.
Your plate should also display the name and postcode of the company that made up the plate for you. Official number plate sizes should be the following-If you have a Euro symbol on the plate the character width should be reduced from 57mm to 50mm. To conform to MOT Rules.

MOT Testing Number Plates

MOT Testing Number Plates;Image courtesy of Wikipedia.

Height 79mm
Width 50mm other than figure 1 or letter I
Stroke 14mm
Character spacings 11mm
Group spacings 33mm
Top and Bottom and Side margins 11mm minimum
Vertical line spacings 19mm

MOT Euro symbol

The Euro-symbol must have the letters “GB” under the European flag if a plain number plate is used the vehicle must use a separate “GB” sticker when driving in another European country. Furthermore, private number plates must have the letters and numbers correctly separated apart and not clustered together to make up a name.
Hope this information is of use to you for more help you can contact…https://www.pellonautocentre.com/?s=number+plates

Or email pellontyres@btconnect.com for any advice.

not a bad idea? Eric Roberts

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *