How a clutch works

How a clutch works – internals of transmission and clutch assembly

How a clutch works

How a clutch works

This is a video showing how a slave cylinder, clutch and transmission work together to engage power from the engine and disengage power from the engine to the transmission. Filmed at the Toyota Commemorative museum of Industry and Technology near Nagoya, Japan. Clutches are what we call a “bread and butter” job. Hence, i thought that i would show a video to demonstrate the things that our technicians have to do when replacing the clutch.
We often have our customers ringing us. Consequently, they ask the question, “how can i tell if my clutch is going”. Therefore, I usually answer with the same explanation. You’ll know when the clutch is going. Because the biting point will happen with less pedal push, and the clutch will slip when the drive is under heavy load.

How a clutch works

When i car eventually arrives in the workshop. We start the car and dip the clutch pedal. Next step is to place the car into third gear. With the handbrake of, we then very slowly release the clutch. A good clutch will stall the engine.
if you carry out the same procedure with a slipping clutch. Then, the engine will probably judder, try to pull away and then the engine will stall. Sometimes, you will hear a rattle when you release the clutch pedal. This is a sign that the clutch plate will be broken up and needs replacing.
Another sign that your clutch is on the way out, is that there will be terrible smell, when the clutch pedal is released. This is a problem with death drivers. because, they cannot hear very well then they do not know that their clutch is slipping. The tell tale sign is the smell that the burning clutch plate gives off. We have one customer, who goes through a clutch a year,(good for business?).